|
AMSOIL Synthetic Lubricants | Long-Lasting
Service:
AMSOIL lubricants have a long service
life. Non-synthetic lubes can break down from oxidation and heat. When that happens, they sludge-up, form
deposits and have to be changed. AMSOIL
lubricants resist breakdown, so they stay intact and run clean. This resistance to heat and oxidation
prolongs the service life of AMSOIL synthetic lubricants, significantly
extending drain intervals.
Low Temperature Fluidity/High Temperature Stability:
AMSOIL lubricants resist the effects of heat and cold far better
than nonsynthetic lubricants. AMSOIL synthetics will make the difference when starting an engine
that’s cold, and cooling an engine that’s hot. Rust and Corrosion Protection:
AMSOIL contains special additives to
prevent rust and corrosion – a vital factor for equipment that sits idle or is stored for part of
the year. Anti-Friction:
AMSOIL lubricants are “super-slippery.” They are extremely effective in reducing
friction and drag between moving parts, resulting in reduced wear, more efficient operation and
better fuel economy. Versatile For Most Applications:
In most cases, AMSOIL lubricants eliminate the need for specialty
lubes. AMSOIL products meet or exceed
the performance specifications of a wide variety of farm machinery. |
 AMSOIL Synthetic Diesel Oils
| Series 3000 5W-30 |
|
| Diesel Oil |
|
| DEO Syn 15W-40 Premium |
|
| Diesel Oil |
|
| DEO Syn 5W-40 Premium |
|
| Diesel Oil |
|
| SAE 15W-40 Syn H/D |
|
| Diesel/Marine Oil |
|
| ACD SAE 10W/SAE 30 Syn |
|
| Diesel Oil |
|
| PCO SAE 15W-40 Synthetic |
|
| Blend Diesel Oil |
|
 Outstanding Performance At Extreme Temperatures AMSOIL Flows in the Cold
Non-synthetic oils thicken rapidly as
the temperature drops. In cold weather, this causes difficult starting as the engine fights to turn over
against the semi-solid lubricant. Even
if the engine starts, the cold, thick oil will not
circulate immediately, which means some parts of the engine can run for up to five minutes without any
lubrication at all. AMSOIL stays
fluid at much lower temperatures. In cold weather, AMSOIL
permits easier starting and instant lubrication throughout the entire engine. During starts and
warm-ups,
critical engine surfaces slide, protected by a tough, reliable film of oil between
them. AMSOIL Takes the Heat
A hard-working engine generates tremendous heat, a serious problem for non-synthetic lubricants.
Oil thickening and oil consumption occur when high temperatures evaporate
the lighter, more
volatile portions of petroleum-based oil. Heat also causes oxidation, forming gummy sludges and
varnishes. AMSOIL is heat-stable. AMSOIL resists volatile evaporation and
thickening at high temperatures. It resists oxidation and inhibits the formation of engine
deposits. Low volatility means reduced oil consumption. Reduced thickening promotes
better fuel economy (because thick oil causes internal engine resistance) and better engine
protection, especially during cold start-ups when thick oil doesn’t circulate properly.
AMSOIL actually cools hot engines
and gear boxes too, reducing stress on components nd
extending equipment life. Availability:
AMSOIL synthetic motor oils are available
in quart, gallon and 2.5-gallon containers, and 30- and 55-gallon drums. Performance:
AMSOIL Synthetic Diesel Oils are fuel
efficient, super-heavy-duty, multi-viscosity lubricants for use in light and heavy-duty diesel and
gasoline engines. Their synthetic base stocks
and proven long-life additives assure performance, economy,
and outstanding protection over extended drain intervals. Because they meet and exceed
the lubrication demands of virtually every light and heavy-duty diesel and gasoline engine, farmers
with a variety of vehicles need only stock one of
these “all-engine” oils for
their vehicles and equipment.
AMSOIL Synthetic Gear Lube
| Syn Severe Gear 75W-90 |
|
|
| Syn Severe Gear 75W-110 |
|
|
| Syn Severe Gear 75W-140 |
|
|
Farmers need to cut costs wherever and whenever they can. AMSOIL Synthetic Gear Lubes save money by making drive trains operate as efficiently as
possible, for as long as possible. Reduce Friction:
AMSOIL Synthetic Gear Lubes are blended with outstanding anti-friction
properties. Friction in transmissions and differentials steals energy. Lost energy translates into
less power and poor fuel economy. The superior “slipperiness” of AMSOIL Gear Lubes makes gear-boxes run cooler and easier. Components move with
less resistance, even under heavy loads. Transmission parts last longer and the saved energy is
transmitted to the
wheels, allowing maximum use of every gallon of fuel. Reduce
Wear:
The outstanding extreme pressure and anti-wear properties of AMSOIL Synthetic Gear Lubes keep wear at an absolute minimum. The results:
greater equipment reliability and less money spent on repairs, replacement parts, and costly down-time. AMSOIL helps keep equipment in the field and
out of the shop!
AMSOIL Synthetic Grease
| Heavy-Duty Grease NLGI #2 |
|
|
| Heavy-Duty Grease NLGI #1 |
|
|
| Multi-Purpose Grease NLGI #2 |
|
|
| Multi-Purpose Grease NLGI #1 |
|
|
| Water Resistant Grease |
|
|
| Multi-Purpose Spray Grease |
|
|
| High Viscosity Lithium Complex |
|
|
| Semi-Fluid 00 Synthetic EP |
|
|
| X-Treme Synthetic Food Grade |
|
|
| Synthetic Polymeric Off-Road Grease |
|
| NLGI #1 & NLGI #2 |
|
AMSOIL Synthetic Greases Outperform Ordinary Grease AMSOIL synthetic extreme pressure lithium complex
greases offer outstanding protection and extended service lives. Load-Bearing and Extreme Pressure
Protection
AMSOIL synthetic extreme pressure lithium complex greases offer outstanding protection in high-load
and extreme-pressure operations. The great film strength
of synthetic base stocks, mechanical stability of lithium
complex thickeners and the protective shield provided by extreme-pressure agents make AMSOIL greases top of the line.
Friction Reduction
AMSOIL synthetic extreme pressure lithium complex greases have a low
coefficient of friction that helps keep wear rates low and efficiency high by minimizing friction. High-
and Low-Temperature Performance
Outstanding thermal and oxidative stability allow AMSOIL synthetic greases
to protect in higher temperatures than conventional greases without breaking
down or forming deposits. Outstanding
cold-temperature pumpability allows them to protect in lower temperatures than conventional greases. Additional
Benefits
Excellent washout resistance and corrosion inhibition offer outstanding protection in wet applications
or for stored equipment.
Series 2000 Synthetic Racing Grease
AMSOIL Series
2000 Synthetic Racing Grease (GRG) is formulated for high-speed/hightemperature and low-speed high-load applications.
It provides the load-bearing capacity of a heavy-duty grease and the high-temperature protection of a multi-purpose
grease. Synthetic Heavy Duty Greases
AMSOIL Synthetic Heavy Duty Greases (GHD) are
moly-fortified greases formulated for low-speed high-load applications. They provide dependable
performance
in extreme pressure conditions. Synthetic Multi-Purpose Greases
AMSOIL Synthetic Multi-Purpose
Greases (GLC) are formulated for high-speed/high-temperature service. Their outstanding thermal and oxidative stability
inhibits deposit formation and grease breakdown in high-temperature applications. Their superior friction-reducing
ability helps keep high-speed components operating in their optimal temperature range and helps keep them running clean.
Synthetic Water Resistant Grease
(GWR) is an extreme-pressure lithium complex wheel bearing
grease specially formulated for extreme resistance to water washout. It is the grease of choice for protection of
frequently wetted components, such as marine trailer wheel bearings. AMSOIL Water Resistant Grease forms a shield
against rust and corrosion, protecting components during use and storage. Fifth Wheel and Open
Gear Compound AMSOIL Synthetic Fifth Wheel and Open Gear Compound (GFW) provides outstanding truck tractor
fifth wheel lubrication and protection. AMSOIL Synthetic Fifth Wheel and Open Gear Compound adheres to metal surfaces that
are dirty or otherwise poorly prepared for lubrication, making it ideal for hard-to-service equipment operating in hostile
environments. AMSOIL Synthetic Fifth Wheel and Open Gear Compound resists water washout, protecting fifth wheels
that are exposed to water. Top-quality anti-rust and anti-corrosion agents protect surfaces from the rust and corrosion
water exposure may cause. AMSOIL Synthetic Fifth Wheel and Open Gear Compound offers superior protection in
high and low temperatures. It does not flake in low temperatures or soften in high temperatures. AMSOIL Synthetic
Fifth Wheel and Open Gear Compound sprays on. It’s quick, neat and economical to use.
AMSOIL Fuel Additives
| Diesel Recovery |
|
| Emergency Fuel Treatment |
|
| Diesel Concentrate |
|
| Plus Cold Flow Improver |
|
| Diesel Fuel Additive Concentrate |
|
|
| Cold Flow Improver |
|
|
| Cetane Boost |
|
| Diesel Fuel Additive |
|
AMSOIL provides top-quality fuel additives for
gasoline and diesel applications. Four-wheel drive vehicles benefit from the fuel enhancement properties found in
AMSOIL fuel additives. AMSOIL Diesel Concentrate
AMSOIL Diesel Concentrate (ADF) is a total system cleaner and lubricity improver for all types
of diesel engines. AMSOIL Diesel Concentrate compensates for the quality variances of different fuels (including
bio-diesels) and the deficiencies of today’s ultra-low sulfur diesel fuel for better engine operation. It reduces
cylinder wear, retains TBN longer, minimizes soot loading and acts as a fuel stabilizer. AMSOIL Diesel Concentrate restores horsepower to like-new levels
and improves fuel
economy by up to five percent. AMSOIL
Cold Flow Improver
AMSOIL Cold Flow
Improver (DFF) for diesel fuel is designed for use in ultra-low sulfur diesel fuel, yet works well with conventional
fuels. It functions by
modifying wax crystal formation at low temperatures to depress the pour point and improve
cold flow filtration properties. AMSOIL Cold Flow
Improver contains jet fuel-type deicer to help prevent ice formation in fuels contaminated with water. It is recommended
for use with diesel engines and is compatible with
diesel exhaust particulate filters. AMSOIL Cold Flow Improver is excellent for use with AMSOIL Diesel Concentrate and AMSOIL
Cetane Boost Additive. AMSOIL
Cetane Boost
North American diesel fuel is notoriously cetane-deficient. Often, the performance problems
drivers blame on their diesel engines, like rough running and a
lack of power, are actually caused by cetane-deficient
diesel fuel. Instead of igniting smoothly, low cetane fuel explodes, sending shock waves through the combustion
chamber and throughout the engine. AMSOIL
Cetane Boost (ACB) (for use in all diesel engines) raises cetane three to seven numbers, helping engines start dependably
and run smoothly and powerfully. AMSOIL diesel
fuel additives are alcohol-free for seal protection. AMSOIL
diesel fuel additives may be mixed during fueling.
AMSOIL Synthetic Hydraulic Oil
| Synthetic Anti-Wear Hydraulic Oil |
|
| Amsoil Sells ISO 15/22/32/46/68 |
|
| Synthetic Tractor Hydraulic |
|
| Transmission Oil SAE 5W-30 |
|
| Synthetic Biodegradable |
|
| Hydraulic Oil |
|
Improves Performance and Reliability. . . Saves Time and Money SVG-16 ATH-55 HDD-30 Most
hydraulic/transmission failures are caused by contamination or breakdown of the hydraulic fluid.
Excess heat is a major enemy of hydraulic/transmission fluids. Non- synthetic hydraulic
fluids are likely to oxidize when exposed to the extreme environment of tractor transmissions
and hydraulic systems. Oxidation leads to the formation of acids, varnish and sludge deposits.
This can thicken oil, reduce lubricating abilities, accelerate wear, damage hoses and
lead to further overheating and catastrophic component failures. AMSOIL Tractor Hydraulic/ Transmission Oil (ATH) is made up of thermally
stable and chemically resistant synthetic base stocks, and premium- quality additives.
AMSOIL ATH is highly resistant to heat breakdown
and chemical changes. It is a better "carrier” for heat transfer, so equipment runs 20°
to 50° cooler. All of this means more
efficient and economical operation, with less maintenance
and profit-stealing downtime. The durability of AMSOIL ATH allows drain intervals two to three times longer than those of conventional fluids.
This saves time, effort and money because you buy fluid less often.
Cooler operation with
AMSOIL ATH  increases fuel economy and equipment life, especially for hoses, which are susceptible to heat damage.
AMSOIL ATH also provides superior
protection against rust and corrosion, a critical form of protection during equipment storage.
AMSOIL Synthetic Tractor Hydraulic/
Transmission Oil is “all weather” oil that operates over a wide range of temperatures. It
has a high viscosity index to maintain its lubricity at high
operating temperatures, and it flows
at temperatures as low as -47°F for improved equipment operation and wear protection. It exceeds
the most demanding “all weather” specifications of both Ford New Holland FNHA 2-C-200
& 2-C-201 and John Deere J20C & J20D, eliminating the need for seasonal oil changes.
|
